Products > Rubber to Metal Assembled >> Machinery Feet
 

Machinery Feet

A range of machinery and equipment feet has been added to the range. Two basic styles are provided, both of which have some adjustment capability for fine levelling.
The smaller sizes (E-CAM-50 and E-CAM-75 feature a bonded element allowing the mount to be jacked when loaded by 7mm.
The larger sizes have a separate rubber element which can be adjusted to by 10 – 15mm when loaded.

Installation
 Adjustments should be made when the mounts are loaded and the top metal surface of the mounts should be fully covered.
 

E-CAM-50 & E-CAM-75

E-CAM-85 to E-CAM-170

Dimensions

Model D m/m H m/m d Set Screw h m/m Optimal Load Kgs Deflection in mm E-CAM-50 50 24 M-8 x 50 40 100 3.3 E-CAM-75 76 35 M-10 x 75 65 350 6.5 E-CAM-85 90 40 M-12 x 90 80 600 4.2 E-CAM-90 90 49 M-16 x 120 115 900 6.1 E-CAM-125 125 52 M-16 x 120 110 2.500 5.5 E-CAM-170 170 57 M-20 x 130 120 4.000 4.1